Rooting Guide for Blackview Hero 10 – Step-by-Step

Learn how to root your Blackview Hero 10 with our detailed 2025 guide. Unlock full control with Magisk, TWRP, and DigitalNerds.

Blackview Hero 10

How to Root Blackview Hero 10

This guide provides step-by-step instructions to root your Blackview Hero 10 using Magisk and TWRP. Unlock custom ROMs, rooted apps, and more with DigitalNerds.

1. Prerequisites for Rooting Blackview Hero 10

A Windows, macOS, or Linux PC
A USB cable compatible with your device
At least 60% battery on your Blackview Hero 10
USB Drivers for your device:
- Blackview USB Drivers
ADB and Fastboot tools: Download
Magisk APK: Download
TWRP Recovery for Blackview Hero 10: Download
Firmware for Blackview Hero 10:

2. Enable Developer Options, OEM Unlock, and USB Debugging

Go to Settings > About phone > Build number
Tap Build number 7 times to enable Developer Options
Go to Settings > System > Developer options
Enable OEM unlocking (if available)
Enable USB debugging

3. Unlock the Bootloader on Blackview Hero 10

⚠️ This will wipe your data. Backup everything important.

Power off your Blackview Hero 10
Boot into Fastboot mode:
- Press and hold Volume Down + Power (or brand-specific combination) until the Fastboot screen appears
Connect your device to your PC via USB
Open a terminal/command prompt and navigate to the ADB/Fastboot directory
Run:
```
fastboot devices
```
Confirm your device is detected
Unlock the bootloader:
```
fastboot flashing unlock
```
Follow on-screen prompts (e.g., press Volume Up to confirm)
The device will wipe and reboot
After reboot, re-enable USB debugging and OEM unlocking in Developer Options

4. Download and Extract Firmware for Blackview Hero 10

Download the latest stock firmware for your Blackview Hero 10:
Extract the firmware to obtain the boot.img or init_boot.img file (depending on your device’s firmware)

5. Patch Boot Image with Magisk

Install the Magisk APK on your Blackview Hero 10
Transfer the boot.img or init_boot.img from the extracted firmware to your device
Open the Magisk app:
- Tap Install > Select and Patch a File
- Choose boot.img or init_boot.img
Magisk will generate a patched file (e.g., magisk_patched-xxx.img)
Transfer the patched file to your PC

6. Flash Patched Boot Image

⚠️ Disclaimer: Check your device’s firmware to confirm whether it uses boot.img or init_boot.img. Using the wrong image can brick your device. Refer to XDA Forums or your device’s firmware documentation.

Boot your Blackview Hero 10 into Fastboot mode again (Volume Down + Power)
Connect to your PC

In the terminal/command prompt, run:

fastboot flash boot magisk_patched-xxx.img

or, if your firmware uses init_boot:

fastboot flash init_boot magisk_patched-xxx.img

Reboot the device:
```
fastboot reboot
```

7. Verify Root Access

Open the Magisk app on your Blackview Hero 10
It should show “Installed” and “Rooted” status
Optionally, install a root checker app from the Play Store to confirm

Alternate Option for Rooting Blackview Hero 10

If you’re unsure about manual flashing, try a trusted service where professionals handle rooting your Blackview Hero 10 remotely. Ideal for avoiding risks with tools like Magisk or TWRP.

🌐 Try it here: https://www.oneclickroot.com/root-now/

Coming soon: Download pre-rooted firmware or ready-to-flash root files for Blackview Hero 10 directly from DigitalNerds.

Alternatively, find community-contributed root files for Blackview Hero 10 on:
👉 XDA Forums
👉 Needrom.com

(Note: Verify compatibility with your Blackview Hero 10 firmware version.)

FAQs About Rooting Blackview Hero 10

What is rooting Blackview Hero 10?

Rooting your Blackview Hero 10 grants superuser access, allowing you to install custom ROMs, use rooted apps, and customize your device with tools like Magisk or TWRP.

Is rooting Blackview Hero 10 safe?

Rooting Blackview Hero 10 is safe if you follow our guide carefully. Backup data, use verified tools like Magisk, and avoid unofficial firmware to prevent issues.

Can I unroot Blackview Hero 10?

Yes, you can unroot Blackview Hero 10 by flashing stock firmware via Fastboot. Visit DigitalNerds for an unrooting guide.

Troubleshooting Rooting Issues for Blackview Hero 10

Fix Blackview Hero 10 Bootloop After Rooting

If your Blackview Hero 10 is stuck in a bootloop, boot into TWRP recovery (if installed) and wipe cache/data. Reflash the stock firmware using Fastboot.

Magisk Not Installed on Blackview Hero 10

Ensure you’ve flashed the correct magisk_patched-xxx.img (boot or init_boot). Check compatibility with your Blackview Hero 10 firmware version on XDA Forums.

You’re All Set!

You've successfully rooted your Blackview Hero 10! Enjoy custom ROMs, rooted apps, and full control with DigitalNerds.

⚠️ Rooting your device may void the warranty and can potentially brick your phone if not done correctly. Ensure you use the correct boot.img or init_boot.img for your firmware. Proceed only if you understand the risks.

Compare Blackview Hero 10 on Device Clash

Want to see how the Blackview Hero 10 stacks up? Use our Device Clash tool to compare over 13,500 devices side by side, including phones and tablets.

Compare Now

View Blackview Hero 10 Specifications