Rooting Guide for Blackview Wave 8C – Step-by-Step

Learn how to root your Blackview Wave 8C with our detailed 2025 guide. Unlock full control with Magisk, TWRP, and DigitalNerds.

Blackview Wave 8C

How to Root Blackview Wave 8C

This guide provides step-by-step instructions to root your Blackview Wave 8C using Magisk and TWRP. Unlock custom ROMs, rooted apps, and more with DigitalNerds.

1. Prerequisites for Rooting Blackview Wave 8C

A Windows, macOS, or Linux PC
A USB cable compatible with your device
At least 60% battery on your Blackview Wave 8C
USB Drivers for your device:
- Blackview USB Drivers
ADB and Fastboot tools: Download
Magisk APK: Download
TWRP Recovery for Blackview Wave 8C: Download
Firmware for Blackview Wave 8C:

2. Enable Developer Options, OEM Unlock, and USB Debugging

Go to Settings > About phone > Build number
Tap Build number 7 times to enable Developer Options
Go to Settings > System > Developer options
Enable OEM unlocking (if available)
Enable USB debugging

3. Unlock the Bootloader on Blackview Wave 8C

⚠️ This will wipe your data. Backup everything important.

Power off your Blackview Wave 8C
Boot into Fastboot mode:
- Press and hold Volume Down + Power (or brand-specific combination) until the Fastboot screen appears
Connect your device to your PC via USB
Open a terminal/command prompt and navigate to the ADB/Fastboot directory
Run:
```
fastboot devices
```
Confirm your device is detected
Unlock the bootloader:
```
fastboot flashing unlock
```
Follow on-screen prompts (e.g., press Volume Up to confirm)
The device will wipe and reboot
After reboot, re-enable USB debugging and OEM unlocking in Developer Options

4. Download and Extract Firmware for Blackview Wave 8C

Download the latest stock firmware for your Blackview Wave 8C:
Extract the firmware to obtain the boot.img or init_boot.img file (depending on your device’s firmware)

5. Patch Boot Image with Magisk

Install the Magisk APK on your Blackview Wave 8C
Transfer the boot.img or init_boot.img from the extracted firmware to your device
Open the Magisk app:
- Tap Install > Select and Patch a File
- Choose boot.img or init_boot.img
Magisk will generate a patched file (e.g., magisk_patched-xxx.img)
Transfer the patched file to your PC

6. Flash Patched Boot Image

⚠️ Disclaimer: Check your device’s firmware to confirm whether it uses boot.img or init_boot.img. Using the wrong image can brick your device. Refer to XDA Forums or your device’s firmware documentation.

Boot your Blackview Wave 8C into Fastboot mode again (Volume Down + Power)
Connect to your PC

In the terminal/command prompt, run:

fastboot flash boot magisk_patched-xxx.img

or, if your firmware uses init_boot:

fastboot flash init_boot magisk_patched-xxx.img

Reboot the device:
```
fastboot reboot
```

7. Verify Root Access

Open the Magisk app on your Blackview Wave 8C
It should show “Installed” and “Rooted” status
Optionally, install a root checker app from the Play Store to confirm

Alternate Option for Rooting Blackview Wave 8C

If you’re unsure about manual flashing, try a trusted service where professionals handle rooting your Blackview Wave 8C remotely. Ideal for avoiding risks with tools like Magisk or TWRP.

🌐 Try it here: https://www.oneclickroot.com/root-now/

Coming soon: Download pre-rooted firmware or ready-to-flash root files for Blackview Wave 8C directly from DigitalNerds.

Alternatively, find community-contributed root files for Blackview Wave 8C on:
👉 XDA Forums
👉 Needrom.com

(Note: Verify compatibility with your Blackview Wave 8C firmware version.)

FAQs About Rooting Blackview Wave 8C

What is rooting Blackview Wave 8C?

Rooting your Blackview Wave 8C grants superuser access, allowing you to install custom ROMs, use rooted apps, and customize your device with tools like Magisk or TWRP.

Is rooting Blackview Wave 8C safe?

Rooting Blackview Wave 8C is safe if you follow our guide carefully. Backup data, use verified tools like Magisk, and avoid unofficial firmware to prevent issues.

Can I unroot Blackview Wave 8C?

Yes, you can unroot Blackview Wave 8C by flashing stock firmware via Fastboot. Visit DigitalNerds for an unrooting guide.

Troubleshooting Rooting Issues for Blackview Wave 8C

Fix Blackview Wave 8C Bootloop After Rooting

If your Blackview Wave 8C is stuck in a bootloop, boot into TWRP recovery (if installed) and wipe cache/data. Reflash the stock firmware using Fastboot.

Magisk Not Installed on Blackview Wave 8C

Ensure you’ve flashed the correct magisk_patched-xxx.img (boot or init_boot). Check compatibility with your Blackview Wave 8C firmware version on XDA Forums.

You’re All Set!

You've successfully rooted your Blackview Wave 8C! Enjoy custom ROMs, rooted apps, and full control with DigitalNerds.

⚠️ Rooting your device may void the warranty and can potentially brick your phone if not done correctly. Ensure you use the correct boot.img or init_boot.img for your firmware. Proceed only if you understand the risks.

Compare Blackview Wave 8C on Device Clash

Want to see how the Blackview Wave 8C stacks up? Use our Device Clash tool to compare over 13,500 devices side by side, including phones and tablets.

Compare Now

View Blackview Wave 8C Specifications