Rooting Guide for Nothing (3a) – Step-by-Step

Learn how to root your Nothing Phone (3a) with our detailed 2025 guide. Unlock full control with Magisk, TWRP, and DigitalNerds.

Nothing Phone (3a)

How to Root Nothing (3a)

This guide provides step-by-step instructions to root your Nothing Phone (3a) using Magisk and TWRP. Unlock custom ROMs, rooted apps, and more with DigitalNerds.

1. Prerequisites for Rooting Nothing Phone (3a)

A Windows, macOS, or Linux PC
A USB cable compatible with your device
At least 60% battery on your Nothing Phone (3a)
USB Drivers for your device:
- Nothing USB Drivers
ADB and Fastboot tools: Download
Magisk APK: Download
TWRP Recovery for Nothing Phone (3a): Download
Firmware for Nothing Phone (3a):

2. Enable Developer Options, OEM Unlock, and USB Debugging

Go to Settings > About phone > Build number
Tap Build number 7 times to enable Developer Options
Go to Settings > System > Developer options
Enable OEM unlocking (if available)
Enable USB debugging

3. Unlock the Bootloader on Nothing Phone (3a)

⚠️ This will wipe your data. Backup everything important.

Power off your Nothing Phone (3a)
Boot into Fastboot mode:
- Press and hold Volume Down + Power (or brand-specific combination) until the Fastboot screen appears
Connect your device to your PC via USB
Open a terminal/command prompt and navigate to the ADB/Fastboot directory
Run:
```
fastboot devices
```
Confirm your device is detected
Unlock the bootloader:
```
fastboot flashing unlock
```
Follow on-screen prompts (e.g., press Volume Up to confirm)
The device will wipe and reboot
After reboot, re-enable USB debugging and OEM unlocking in Developer Options

4. Download and Extract Firmware for Nothing Phone (3a)

Download the latest stock firmware for your Nothing Phone (3a):
Extract the firmware to obtain the boot.img or init_boot.img file (depending on your device’s firmware)

5. Patch Boot Image with Magisk

Install the Magisk APK on your Nothing Phone (3a)
Transfer the boot.img or init_boot.img from the extracted firmware to your device
Open the Magisk app:
- Tap Install > Select and Patch a File
- Choose boot.img or init_boot.img
Magisk will generate a patched file (e.g., magisk_patched-xxx.img)
Transfer the patched file to your PC

6. Flash Patched Boot Image

⚠️ Disclaimer: Check your device’s firmware to confirm whether it uses boot.img or init_boot.img. Using the wrong image can brick your device. Refer to XDA Forums or your device’s firmware documentation.

Boot your Nothing Phone (3a) into Fastboot mode again (Volume Down + Power)
Connect to your PC

In the terminal/command prompt, run:

fastboot flash boot magisk_patched-xxx.img

or, if your firmware uses init_boot:

fastboot flash init_boot magisk_patched-xxx.img

Reboot the device:
```
fastboot reboot
```

7. Verify Root Access

Open the Magisk app on your Nothing Phone (3a)
It should show “Installed” and “Rooted” status
Optionally, install a root checker app from the Play Store to confirm

Alternate Option for Rooting Nothing (3a)

If you’re unsure about manual flashing, try a trusted service where professionals handle rooting your Nothing Phone (3a) remotely. Ideal for avoiding risks with tools like Magisk or TWRP.

🌐 Try it here: https://www.oneclickroot.com/root-now/

Coming soon: Download pre-rooted firmware or ready-to-flash root files for Nothing Phone (3a) directly from DigitalNerds.

Alternatively, find community-contributed root files for Nothing Phone (3a) on:
👉 XDA Forums
👉 Needrom.com

(Note: Verify compatibility with your Nothing Phone (3a) firmware version.)

FAQs About Rooting Nothing Phone (3a)

What is rooting Nothing Phone (3a)?

Rooting your Nothing Phone (3a) grants superuser access, allowing you to install custom ROMs, use rooted apps, and customize your device with tools like Magisk or TWRP.

Is rooting Nothing (3a) safe?

Rooting Nothing (3a) is safe if you follow our guide carefully. Backup data, use verified tools like Magisk, and avoid unofficial firmware to prevent issues.

Can I unroot Nothing Phone (3a)?

Yes, you can unroot Nothing Phone (3a) by flashing stock firmware via Fastboot. Visit DigitalNerds for an unrooting guide.

Troubleshooting Rooting Issues for Nothing Phone (3a)

Fix Nothing Phone (3a) Bootloop After Rooting

If your Nothing (3a) is stuck in a bootloop, boot into TWRP recovery (if installed) and wipe cache/data. Reflash the stock firmware using Fastboot.

Magisk Not Installed on Nothing (3a)

Ensure you’ve flashed the correct magisk_patched-xxx.img (boot or init_boot). Check compatibility with your Nothing Phone (3a) firmware version on XDA Forums.

You’re All Set!

You've successfully rooted your Nothing Phone (3a)! Enjoy custom ROMs, rooted apps, and full control with DigitalNerds.

⚠️ Rooting your device may void the warranty and can potentially brick your phone if not done correctly. Ensure you use the correct boot.img or init_boot.img for your firmware. Proceed only if you understand the risks.

Compare Nothing (3a) on Device Clash

Want to see how the Nothing Phone (3a) stacks up? Use our Device Clash tool to compare over 13,500 devices side by side, including phones and tablets.

Compare Now

View Nothing Phone (3a) Specifications